Once you have a web site or perhaps an app, speed is really important. The swifter your site performs and then the quicker your web apps work, the better for everyone. Given that a website is an offering of files that connect with one another, the devices that store and work with these files have a huge role in website overall performance.

Hard disk drives, or HDDs, have been, right up until recent years, the most trustworthy devices for keeping data. Nevertheless, in recent years solid–state drives, or SSDs, are actually becoming popular. Look into our evaluation chart to see if HDDs or SSDs are more effective for you.

1. Access Time

Image

A result of a revolutionary new method to disk drive operation, SSD drives make it possible for faster data accessibility rates. Having an SSD, data file access instances tend to be lower (just 0.1 millisecond).

Image

HDD drives rely on spinning disks for files storage purposes. Every time a file is being utilized, you need to await the correct disk to reach the right position for the laser beam to reach the file involved. This leads to a typical access rate of 5 to 8 milliseconds.

2. Random I/O Performance

Image

With thanks to the very same radical technique which allows for quicker access times, also you can enjoy greater I/O effectiveness with SSD drives. They will perform two times as many functions throughout a given time as opposed to an HDD drive.

An SSD can deal with at the least 6000 IO’s per second.

Image

Hard drives feature slower data file access speeds because of the older file storage and accessibility concept they are making use of. In addition, they exhibit noticeably reduced random I/O performance when held up against SSD drives.

During our trials, HDD drives dealt with around 400 IO operations per second.

3. Reliability

Image

The absence of moving components and rotating disks inside SSD drives, as well as the recent improvements in electric interface technology have resulted in a much safer data file storage device, having a typical failure rate of 0.5%.

Image

To have an HDD drive to operate, it needs to rotate a couple of metallic hard disks at over 7200 rpm, retaining them magnetically stable in the air. There is a lot of moving components, motors, magnets along with other gadgets crammed in a small place. So it’s no wonder that the average rate of failing of the HDD drive can vary among 2% and 5%.

4. Energy Conservation

Image

SSD drives are far small compared to HDD drives as well as they lack virtually any moving components at all. As a result they don’t create just as much heat and need a lot less electricity to function and much less energy for cooling reasons.

SSDs take in somewhere between 2 and 5 watts.

Image

From the minute they were developed, HDDs have always been really power–heavy products. When you’ve got a server with many different HDD drives, this tends to increase the regular electricity bill.

Normally, HDDs take in in between 6 and 15 watts.

5. CPU Power

Image

As a result of SSD drives’ higher I/O efficiency, the main hosting server CPU will be able to process file queries a lot quicker and conserve time for other procedures.

The regular I/O wait for SSD drives is only 1%.

Image

When you use an HDD, you will need to spend more time watching for the results of one’s file request. Consequently the CPU will continue to be idle for extra time, expecting the HDD to reply.

The standard I/O wait for HDD drives is about 7%.

6.Input/Output Request Times

Image

It’s time for a few real–world cases. We, at Jeody, competed a detailed system backup with a hosting server using only SSDs for file storage reasons. In that process, the average service time for an I/O demand remained beneath 20 ms.

Image

With the same web server, however, this time equipped with HDDs, the effects were different. The normal service time for an I/O query fluctuated in between 400 and 500 ms.

7. Backup Rates

Image

You can actually check out the real–world benefits of using SSD drives on a daily basis. For instance, with a hosting server designed with SSD drives, a full back–up is going to take just 6 hours.

Image

Alternatively, on a web server with HDD drives, the same backup may take three to four times as long to finish. A full back–up of an HDD–driven hosting server normally takes 20 to 24 hours.

To be able to at once improve the functionality of one’s websites without having to alter just about any code, an SSD–equipped web hosting solution is really a really good choice. Examine the Linux hosting – these hosting solutions highlight fast SSD drives and can be found at reasonable prices.

  • Service guarantees

  •  
  • Jeody’s Virtual Private Servers come with no setup service fees and function in a secure network offering 99.9% of uptime. Full SSH/full root access guaranteed.

  • Compare our prices

  •  
  • Find out more about our pricing and pick the best Virtual Private Server for your powerful web sites. You’ll be able to move up to a more feature–rich VPS package with only a mouse click.
  • Compare our hosting plans

  • Contact Us

  •  
  • It is easy to make contact with us 24/7 by email or by utilizing our super–fast ticketing platform. Jeody provides a 1–hour reply time warranty.